- Information
- Benefits
- Specifications
- Installation Guide
Information
Richco Flat Sheet product is an anti slip sheet ideal for walkways, ramps, gangways, factory floors and many more do it yourself applications.
Richco Flat Sheet is very quick and easy to install and fits over the existing substrate and gives high slip resistance in wet or oily conditions.
- Ideal for Wet or Oily Areas
- Tough & Durable
- Impact and Corrosion Resistant
- Quick and Easy to Install
Benefits
Durable
Richco Flat Sheet is a high quality make up of glass woven matting combined with isophthalic (as standard) polyester resin. The energy absorption and flexibility of the product, ensures its long life, even in the busiest of areas.
Anti Slip
A compound of grit is added in the final layer of laminate providing an excellent slip resistant and hard wearing surface.
Chemical and Corrosion Resistant
Richco Flat Sheet is resistant to a wide range of chemicals and is perfectly suited for use in the harshest of environments.
Do it Yourself Installation
Richco Flat Sheet allows it to be applied to almost any surface such as concrete, steel or wood. The fact that it is supplied as a finished product means that it can be walked on straight away thus keeping disruption to a minimum. This product is ideal for Do it yourself applications.
Specifications
Size
Richco Flat Sheet is available in three standard sizes:
2400mm x 1200mm
1200mm x 1200mm
800mm x 800mm
The product is nominally 4mm thick.
Colour Range
This product is available in the following colours.
 |
||
| Black |
Installation Guide
Surface Preparation
Ensure the areas that are to have Richco Flat Sheets fitted are clean, dry and free from loose and friable material. Any dished or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.
Dry fit all Flat Sheets and ensure that they fit freely and that they sit flat to the surface. If required Richco Flat Sheets can be trimmed onsite to suit using an industrial jigsaw and appropriate cutting blades.
Application
Whilst mechanial fixings are all that is required to secure Richco Flat Sheets, wherever possible, the application of an appropriate high strength gap filling adhesive will provide a secondary fixing in the event that the mechanical fixings should fail.
Apply a 6mm bead of high strength gap-filling adhesive around the periphery of the Flat Sheet and in horizontal stripes at approximately 200mm centres. Immediately press the Flat Sheet firmly to the substrate to ensure adequate transfer of adhesive. A firm bond will be achieved in about one hour under normal circumstances and conditions. Secure with the mechanical fixings and allow the adhesive sealant to cure before allowing excessive traffic to use the area.
Recommended Mechanical Fixings
Over Timber
No 8 x 30mm zinc plated or stainless steel screws.
Over Steel Plate
No 8 x 20mm Self-Tapping Pan Head Pozi Stainless Steel Screws.
No 8 x 20 Self-Drilling Pan Head Philips Zinc Plated Screws
Over Concrete
No 8 x 30mm Zinc Plated or Stainless Steel Impact Anchors (Hilti HPS-1 or Similar)
Over Open Mesh
Stainless steel or zinc plated saddle clips and domed head bolts suitable in length for the depth of the existing treads.
