- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Landing Covers give full coverage to the whole stair Landing with a contrasting coloured nosing. They offer extreme slip resistance and are the ultimate choice for dealing with potential slip hazard areas.
Once installed, step safety is instantly improved.
- Ideal for Landings
- Tough & Durable
- Impact and Corrosion Resistant
- Quick and Easy to Install
Benefits
Durable
Richco Landing Covers are a high quality make up of glass woven matting combined with isophthalic (as standard) polyester resin. The energy absorption and flexibility of the product, ensures its long life, even in the busiest of areas.
Anti Slip
A compound of grit is added in the final layer of laminate providing an excellent slip resistant and hard wearing surface.
Chemical and Corrosion Resistant
Richco Landing Covers are resistant to a wide range of chemicals and is perfectly suited for use in the harshest of environments.
Do it Yourself Installation
The versatility of Richco Landing Covers allows it to be applied to almost any surface such as concrete, steel or wood. The fact that it is supplied as a finished product means that it can be walked on straight away thus keeping disruption to a minimum.
Specifications
Size
Richco Landing Covers are available in a maximum 2400mm wide x 1200mm deep, with a 55mm yellow nosing incorporated into the tread and 55mm down the riser.
The product is nominally 4mm thick with the nosing set at 85°.
Colour Range
This product is available in the following colours.
 |
||
| Black with Yellow Nosing |
Installation Guide
Surface Preparation
Ensure the areas that are to have Richco Landing Covers fitted are clean, dry and free from loose and friable material. Any dished or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.
Dry fit all Landing Covers and ensure that they fit freely and that they sit flat to the surface. If required Richco Landing Covers can be trimmed onsite to suit using an industrial jigsaw and appropriate cutting blades.
Application
Whilst mechanial fixings are all that is required to secure Richco Landing Covers, wherever possible, the application of an appropriate high strength gap filling adhesive will provide a secondary fixing in the event that the mechanical fixings should fail.
Apply a 6mm bead of high strength gap-filling adhesive around the periphery of the Landing Cover and in horizontal stripes at approximately 200mm centres. Immediately press the Landing Cover firmly to the substrate to ensure adequate transfer of adhesive. A firm bond will be achieved in about one hour under normal circumstances and conditions. Secure with the mechanical fixings and allow the adhesive sealant to cure before allowing excessive traffic to use the area.
Recommended Mechanical Fixings
Over Timber
No 8 x 30mm zinc plated or stainless steel screws.
Over Steel Plate
No 8 x 20mm Self-Tapping Pan Head Pozi Stainless Steel Screws.
No 8 x 20 Self-Drilling Pan Head Philips Zinc Plated Screws
Over Concrete
No 8 x 30mm Zinc Plated or Stainless Steel Impact Anchors (Hilti HPS-1 or Similar)
Over Open Mesh
Stainless steel or zinc plated saddle clips and domed head bolts suitable in length for the depth of the existing treads.
