- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Deluxe Marble Stone Carpet is created with the use of deluxe marble stone bound in resin. It produces an extremely attractive finished floor, which is decorative and easy to maintain.
- Uses Marble Stones
- Bespoke Installations
- Deluxe Finish
- Low Maintenance
Benefits
Typical Applications
Richco Deluxe Marble Stone Carpet is suitable for the application indoors and outdoors where a deluxe surface finish is required.
Hard Wearing
Richco Deluxe Marble Stone Carpet provides a hard wearing, durable surface whilst providing a deluxe and high quality appearance.
Bespoke Installations
Richco Deluxe Marble Stone Carpet can incorporate logos, patterns and designs which can be specifically designed and installed for each particular project, thereby creating bespoke installations for individual needs.
UV Stable
This system uses a clear UV stable resin binder to ensure the system does not discolour over time due to constant artifical and natural light exposure.
Specifications
Area Coverage
Sold as a 20 square metre kit.
Unit Size
Sold as a 20 square metre kit.
Colour Range
This product is available in the following colours.
Installation Guide
Curing Time
This product is fit for foot traffic after approximately 4 hours and for vehicular traffic overnight. Full properties will develop in four to five days. Water should not be allowed to lie on the surface for at least 7 days.
Aggregates
Richco Deluxe Marble Stone Carpet should only be used with dry aggregate. The bond strength of the binder will be reduced if damp aggregate is used and excessive foaming will result. Aggregate which has become damp should be dried before use.
Surface Preparation
Richco recommends the application of Richco Stone Binder onto a compacted MoT type one, concrete or ashpalt substrates.
Mixing
Components A+B should be mixed with the marble in a forced action mixer. Whilst coating the marble care should be taken not to over mix, since certain marble can be ground to dust by the action of the mixer causing the binder film to become cloudy. Mixing is complete when a uniform coating covers all the marble (usually 30 seconds to one minute).
Application
The mixed marble is applied to the surface by trowel. A lightweight whacker plate or beam screeder can be used for larger areas. Unless coating a solid substrate (e.g. concrete), depths of less than 25mm should not be used if the surface is to be subject to pedestrian traffic and 40mm for vehicular traffic. In general, five times the size of the largest marble within the mix should be considered as a minimum.
The mixed material remains in a mobile form for approximately 30 to 40 minutes depending on the ambient temperature.
Data Sheets
