- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Scatter Glitter Flooring is an epoxy floor coating with the addition of decorative glitter incorporated into the coating. The finished system provides an attractive and durable surface.
Ideal for application in showrooms, warehouses, restrooms, presentation areas etc.
- Decorative glitter finish
- Easy to clean & maintain
- Hard wearing
- Good chemical resistance
Benefits
High Quality Finish
Richco Scatter Glitter Flooring provides an attractive and easy to clean surface. The Glitter can provide a contrasting colour as well as a high quality surface.
Solvent Free
Being solvent free, this product is formulated to be virtually odourless.
Easy to Clean
Richco Glitter Flooring is resistant to the normal range of industrial cleaners. Do not steam clean or subject to temperatures in excess of 45°C.
Specifications
Area Coverage
Sold as a 20 square metre kit.
Unit Size
Sold as a 20 square metre kit.
Colour Range
This product is available in the following colours.
 |
 |
 |
| Royal Blue | Eye Shadow | Sizzling Hot |
 |
 |
|
| Gun Metal | Silver |
Installation Guide
Curing Time
This product will normally cure overnight at 15°C to accept light foot traffic the next day. Full chemical and wear resistance is achieved over 7 days (at a minimum constant temp of
15°C). Water should not be allowed to lie on the surface for at least 7 days. Avoid washing the surface for 7 days after coating.
Surface Preparation
New concrete should be at least 21-28 days old or the moisture less than 5%. The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Techniques should include one or more of the following, depending on how contaminated the substrate is:- acid etching - light mechanical scabbling - blasting - grinding or degreasing.
Priming
A primer is not generally required, epoxy resin coatings can bubble if applied direct to open textured or very porous surfaces. If your surface is porous, please use Richco Epoxy Primer.
Mixing
Add the full contents of Curing Agent Component B to the contents of Epoxy Resin Component A and mix thoroughly until an even colour is obtained. A low speed paddle mixer is required when mixing epoxy resins.
Application
Apply by brush or roller, re-coating should take place as soon as possible to achieve good intercoat adhesion properties, preferably on the following day. If more than one day elapses between coats, abrade the surface lightly with glass paper, before re-coating. Whilst the coating is still wet use spiked shoes to walk on the wet resin, hand scatter the decorative glitter on top. Take extra care to ensure an even scatter is applied.
Data Sheets
