- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Solid Glitter Flooring is an epoxy coating with the addition of a solid glitter overcoat. The finished system provides a unique, attractive and durable surface.
Ideal for application in showrooms, warehouses, restrooms, presentation areas etc.
- Decorative solid glitter finish
- Easy to clean & maintain
- Hard wearing
- Good chemical resistance
Benefits
High Quality Finish
Richco Solid Glitter Flooring provides an attractive and easy to clean surface.
Solvent Free
Being solvent free, this product is formulated to be virtually odourless.
Easy to Clean
Richco Solid Glitter Flooring is resistant to the normal range of industrial cleaners. Do not steam clean or subject to temperatures in excess of 45°C.
Specifications
Area Coverage
Sold as a 20 square metre kit.
Unit Size
Sold as a 20 square metre kit.
Colour Range
This product is available in the following colours.
 |
 |
 |
| Royal Blue | Eye Shadow | Sizzling Hot |
 |
 |
|
| Gun Metal | Silver |
Installation Guide
Curing Time
This product will normally cure overnight at 15°C to accept light foot traffic the next day. Full chemical and wear resistance is achieved over 7 days (at a minimum constant temp of
15°C). Water should not be allowed to lie on the surface for at least 7 days. Avoid washing the surface for 7 days after coating.
Surface Preparation
New concrete should be at least 21-28 days old or the moisture less than 5%. The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Techniques should include one or more of the following, depending on how contaminated the substrate is:- acid etching-light mechanical scabbling-blasting-grinding or degreasing.
Priming
A primer is not generally required, epoxy resin coatings can bubble if applied direct to open textured or very porous surfaces. If your surface is porous, please use Richco Epoxy Primer.
Mixing
Add the full contents of Curing Agent Component B to the contents of Epoxy Resin Component A and mix thoroughly until an even colour is obtained. A low speed paddle mixer is required when mixing epoxy resins.
Application