- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Garage Floor Paint is an inexpensive way to brighten drab or stained concrete and to make cleaning quicker and easier.
It is high quality acrylic water based paint which provides a clean finish on concrete surfaces.
- Ideal to Brighten Drab Areas
- Easy to Apply
- Inexpensive Floor Paint
- Low Sheen Finish
Benefits
Refurbish Concrete Surfaces
Richco Garage Floor Paint brightens and transforms drab concrete floors in two simple coat.
Easy to Clean
Richco Garage Floor Paint provides a finished surface that is easy to clean and maintain.
Simple to Use
Richco Garage Floor Paint is easy to apply and dries quickly to a provide an oil resistant finish.
Specifications
Area Coverage
Coverage area is approximately 15 - 20m per 5kg unit depending on underlying substrate. One coat is normally sufficient.
Unit Size
This product comes in a 5kg unit and is a two part system.
Colour Range
This product is available in the following colours.
 |
 |
 |
| Black | Royal Blue | Baby Blue |
 |
 |
 |
| Rainforest | Khaki Green | Cherry Red |
 |
 |
 |
| Bright Red | Yellow | Buff |
 |
 |
 |
| Tan | Stone | White |
 |
 |
|
| Dark Grey | Light Grey |
Installation Guide
Curing Time
This product will normally cure within 2 - 4 hours at 15 °C to accept light
foot traffic. Ful wear resistance is achieved over 7 days (at a minimum constant temp of 15 °C).
Water should not be allowed to lie on the surface for at least 7 days. Avoid washing the surface for 7 days after coating.
Surface Preparation
New concrete should be at least 21 - 28 days old or the moisture less than 5%. The
substrate should be clean, free from laitance, oil, grease or other agents which may impair
adhesion. Techniques should include one or more of the following, depending on how
contaminated the substrate is:- acid etching - light mechanical scabbling - blasting - grinding or degreasing.
Not to be applied if there is salt contamination or frost.
Mixing
Mix thoroughly with a wide bladed tool until an even colour is obtained.
Application
Best results are obtained in warm conditions (minimum 15°C). On horizontal surfaces apply by medium pile type roller in one even coat.
Do not apply paint if there is risk of rain or frost.
