- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Epoxy Line Marking is a brush applied, epoxy resin paint created for line marking that provides a heavy duty line that is resistant to abrasion and harsh chemicals. Ideal for use in heavy traffic areas.
Richco Epoxy Line Marking is touch dry overnight and is formulated to be solvent free and virtually odourless.
- Hard Wearing and Durable
- Fast Drying
- Brush Applied or Roller
- Adhers Well to Most Surfaces
Benefits
Easy to Apply
Richco Epoxy Line Marking is quickly and easily applied using a paint brush.
Hard Wearing
Richco Epoxy Line Marking is an extremely hard wearing and durable line marking that is suitable for carpark and warehouse marking use.
fast Drying
Richco Epoxy Line Marking is fast curing and allows the area to be opened up to traffic the following day.
Choice of Colours
Richco Epoxy Line is available in a large range of colours to suit various applications.
Specifications
Area Coverage
5kg unit of Richco Epoxy Line Marking will cover approximately 20m per unit per coat. Please note: porous surfaces, very light colours and pastel shades may require extra coats.
Unit Size
This product comes in a 5kg unit and is a two part system.
Colour Range
This product is available in the following colours.
 |
 |
|
| Black | Royal Blue | |
 |
 |
|
| Bright Red | Yellow | |
 |
||
| White |
Installation Guide
Curing Time
This product will normally cure overnight at 15°C to accept light foot traffic the next day. Full chemical and wear resistance is achieved over 7 days (at a minimum constant temp of
15°C). Water should not be allowed to lie on the surface for at least 7 days. Avoid washing the surface for 7 days after coating.
Surface Preparation
New concrete should be at least 21 - 28 days old or the moisture less than 5%. The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Techniques should include one or more of the following, depending on how contaminated the substrate is:- acid etching - light mechanical scabbling - blasting - grinding or degreasing.
Priming
A primer is not generally required, epoxy resin coatings can bubble if applied direct to open textured or very porous surfaces. If your surface is porous, please use Richco Epoxy Primer.
Mixing
Add the full contents of Curing Agent Component B to the contents of Epoxy Resin Component A and mix thoroughly until an even colour is obtained.
Application
Apply by brush or roller, re-coating should take place as soon as possible if required.
