- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Thermoplastic Line Marking system is ideally applied to tarmac surfaces.
This system combines longevity and excellent adhesion with ease of application. Ideal for warehouses, pavements and low use carparks.
- Heat Applied
- Suitable for Internal and External Use
- One Person Application
- Tough and Flexible
- Adhers Well to Tarmac
Benefits
Easy to Apply
Richco Thermoplastic Line Marking is quickly and easily applied using a blow torch powered by a standard gas bottle.
Low Downtime
Richco Thermoplastic Line Marking does not require any curing time, allowing the area to be opened up for traffic immediately after application.
Specifications
Product Range
Thermoplastic Line Marking is available in the following range.
| Line | Straight Arrow |
 |
 |
| Left Arrow | Right Arrow |
 |
 |
| Mother & Child Symbol | Pedestrian Symbol |
 |
 |
| Disabled Symbol | Forklift Symbol |
 |
 |
Installation Guide
Curing Time
This product does not need any curing time. Water should not be allowed to lie on the surface for at least 7 days. Avoid washing the surface for 7 days after application.
Surface Preparation
The substrate should be dry, clean, free from laitance, oil, grease or other agents which may impair adhesion.
Priming
A primer is not generally required.
Application
Remove the protective plastic film and place into position. When laying lines, ensure they are butted up correctly and straight. Ignite and turn torch on to required pressure. Position nozzle of blowtorch 4 - 6 inches above the centre of the marking at one end. With a pendulum motion from side to side, bring the material to a fluid state so that it bubbles, continue to proceed down the marking using the same action.
