- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Traffic Line is a solvent free paint formulated especially for the use on asphalt and tarmac. Applied by brush one coat produces a flexible line which is unaffected by sunlight.
Richco Traffic Line is ideal for marking out walkways and no access areas.
- Fast Drying
- One Coat Application
- Brush Applied
Benefits
Easy to Apply
Richco Traffic Line Marking is quickly and easily applied using a paint brush.
fast Drying
Richco Traffic Line Marking is fast curing and allows the area to be opened up to traffic the following day.
Specifications
Area Coverage
5kg unit of Richco Traffic Line Marking will cover approximately 15 - 20m per unit.
Unit Size
This product comes in a 5kg unit and is a two part system.
Colour Range
This product is available in the following colours.
 |
 |
|
| White | Yellow |
Installation Guide
Curing Time
This product will normally cure overnight at 15°C to accept light foot traffic the next day. Full chemical and wear resistance is achieved over 7 days (at a minimum constant temp of
15°C). Water should not be allowed to lie on the surface for at least 7 days. Avoid washing the surface for 7 days after coating.
Surface Preparation
New concrete should be at least 21 - 28 days old or the moisture less than 5%. The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Techniques should include one or more of the following, depending on how contaminated the substrate is:- acid etching - light mechanical scabbling - blasting - grinding or degreasing.
Priming
A primer is not generally required.
Mixing
Add the full contents of Curing Agent Component B to the contents of Epoxy Resin Component A and mix thoroughly until an even colour is obtained.
Application
Apply by brush.
Data Sheets
