- Information
- Benefits
- Specifications
- Installation Guide
- Data Sheets
- Buy Online
Information
Richco Rubber Bark Surfacing is ideal for the application around childrens playground areas as well as landscaping areas and tree pits.
The finished rubber bark surface provides a seamless and flexible system while providing a natural looking finish.
- Flexible
- Tolerates Movement
- Porous
- Looks Like Natural Bark
Benefits
Typical Applications
Richco Rubber Bark Surfacing is ideal for the application around childrens playground areas, tree pits and landscaping areas.
Appearance
Richco Rubber Bark cures to a natural looking bark surface without the problems associated with woodchips and loose bark.
Safe For Children
Richco Rubber Bark is ideal for the application around childrens playground areas as the rubber bark is designed to absorb the impact of a childs fall.
Porous
This system allows the ingress of water through the bonded rubber bark to stop water pooling and creating potential slip hazards.
Specifications
Area Coverage
Sold as a 20 square metre kit.
Unit Size
Sold as a 20 square metre kit.
Colour Range
This product is available in the following colours.
 |
 |
 |
| Blend A | Blend B | Blend C |
 |
||
| Blend D | ||
 |
 |
 |
| Black | Blue | Red Wood |
 |
 |
 |
| Earth Tone | Green | Magnolia |
 |
||
| Slate |
Installation Guide
Curing Time
This product is fit for foot traffic after approximately 4 hours. Full properties will develop in four to five days. Water should not be allowed to lie on the surface for at least 7 days.
Surface Preparation
TBA.
Mixing
The rubber should be mixed in a mechanical mixer such as a CreteAngle type and mixing should be carried out for a minimum of 3 minutes.
Richco Rubber Binder should be added at a level of between 2 and 6 kg per 25kg bag of rubber dependant on the application.
Application
TBA.
Data Sheets
