- Information
- Benefits
- Specifications
- Installation Guide
Information
Richco Anti Static Primer is a low viscosity epoxy primer containing conductive fillers to prime concrete and other substrates prior to the application of Richco Anti Static resin systems.
- Easy to apply
- High bonding properties
- Conductive
Benefits
Anti Static
Richco Anti Static Primer has conductivity of less than 0.05 M ohms when tested in accordance with BS2050.
Low Odour
Richco Anti Static Primer can be used in areas where solvent-based products may taint or give off unacceptable odours.
Specifications
Area Coverage
A 5kg unit of Richco Anti Static Primer will cover approximately 20m per 5kg unit per coat.
Unit Size
This product comes in a 5.0kg unit and is a two part system.
Primer Suitable For:
TBA.
Installation Guide
Curing Time
Richco Anti Static Primer can be over coated in 2-4 hours, depending on the degree of penetration into the substrate. Over coating can be made within this time or while still touch dry. If the primer is left for more than 48 hours before over coating, the primer will require abrasion to provide a key.
Surface Preparation
New concrete should be at least 21 - 28 days old or the moisture less than 5%. The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Techniques should include one or more of the following, depending on how contaminated the substrate is:- acid etching - light mechanical scabbling - blasting - grinding or degreasing.
Mixing
Add the full contents of Component B to the contents of Component A and mix thoroughly.
Application
Apply by brush or roller and work well into the surface. Apply in one even coat.