- Information
- Benefits
- Specifications
- Installation Guide
Information
Richco Epoxy Damp Proof Primer is a two-component epoxy resin membrane that is tolerant of residual moisture in concrete floors. This enables earlier application of screeds, coatings etc.
- Easy to apply
- High bonding properties
- Can be applied onto substrates with hygrometer readings up to 97% RH
- Completely solvent free and low odour
- Enables resin coatings to be applied onto new concrete much sooner than the normal time required for concrete to dry
Benefits
Damp Proof
Richco Damp Proof Primer enables resin coatings to be applied onto new concrete much sooner than the normal time required for concrete to dry.
Solvent Free and Low Odour
Richco Damp Proof Primer can be used in areas where solvent-based products may taint or give off unacceptable odours.
Specifications
Area Coverage
A 5kg unit of Richco Epoxy Screed Primer will cover approximately 20m per 5kg unit per coat.
Unit Size
This product comes in a 5.0kg unit and is a two part system.
Primer Suitable For:
TBA.
Installation Guide
Curing Time
Richco Damp Proof Primer can be over coated in 2-4 hours, depending on the degree of penetration into the substrate. Over coating can be made within this time or while still touch dry. If the primer is left for more than 48 hours before over coating, the primer will require abrasion to provide a key.
Surface Preparation
The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Techniques should include one or more of the following, depending on how contaminated the substrate is:- acid etching - light mechanical scabbling - blasting - grinding or degreasing.
Mixing
Add the full contents of Component B to the contents of Component A and mix thoroughly.
Application
Apply by brush or roller and work well into the surface. Apply in one even coat.