- Information
- Benefits
- Specifications
- Installation Guide
Information
Richco Tack Primer is a two-pack medium viscosity solvent-free epoxy resin bonding and priming coat. It provides a greater hold up when applying coving and vertical application of screed system.
- Best foundation
- Improves quality of floor
- Solvent free
Benefits
Vertical/Coving Use
Richco Tack Primer is ideal for use with coving systems, where material needs to be applied on a vertical surface.
Low Odour
Richco Tack Primer can be used in areas where solvent-based products may taint or give off unacceptable odours.
Specifications
Area Coverage
Coverage is approximately 20m per 5.0kg per coat.
Unit Size
This product comes in a 1 and 5.0kg unit and is a two part system.
Primer Suitable For:
TBA.
Installation Guide
Curing Time
Richco Tack Primer can be over coated in 2-4 hours, depending on the degree of penetration into the substrate. Over coating can be made within this time or while still touch dry. If the primer is left for more than 48 hours before over coating, the primer will require abrasion to provide a key.
Surface Preparation
New concrete should be at least 21 - 28 days old or the moisture less than 5%. The substrate should be clean, free from laitance, oil, grease or other agents which may impair adhesion. Techniques should include one or more of the following, depending on how contaminated the substrate is:- acid etching - light mechanical scabbling - blasting - grinding or degreasing.
Mixing
Add the full contents of Component B to the contents of Component A and mix thoroughly.
Application
Apply by brush or roller and work well into the surface. Apply in one even coat.