Specifications

Area Coverage
Coverage area is approximatley 20 - 30m² per coat per 5L depending on the texture of the substrate. One coat is normally required.

Drying Time
Richco Asphalt Paint will dry in approximately 24 hours to accept light traffic, allow 48 hours before bringing the area back into full use. Cold, damp or humid weather will delay drying.

Surface Preparation
Richco Asphalt Paint can be applied to asphalt, tarmac, masonry, bricks and breeze blocks. It also adheres well to concrete, but it is not recommended for concrete where vehicles will be parked.
Ensure the surface is clean, sound and dry (slightly damp is acceptable). A solvent free degreaser can be used on asphalt and similar surfaces.
Richco Asphalt Paint can be applied to existing paint providing all poorly bonded material is removed and glossy surfaces are dulled using abrasive paper

Application
Apply Richco Asphalt Paint by brush or medium pile type roller. One coat is generally sufficient although a second coat may be required on very porous or rough surfaces. Avoid applying too thick. Do not apply externally if rain is due. The second coat should be applied after 1 hour.

Application Tools
Apply Richco Asphalt Paint by brush or medium pile type roller.

Cleaning of Application Tools
Applicators should be washed in warm soapy water before the product starts to cure.