Specifications

Area Coverage
Coverage area is approximately 15 - 20m² per 5L per coat depending on the texture of the substrate. One coat is normally required.

Curing Time
Richco Anti Slip Traffic Paint will normally cure in approximately 24 hours to accept light traffic, but allow 48 hours before bringing the area back into full use. Cold, damp or humid weather will delay curing.

Surface Preparation
Richco Anti Slip Traffic Paint can be applied to asphalt, tarmac and porous concrete. Ensure the surface is clean, sound and dry (slightly damp is acceptable). A solvent free degreaser which can be used on asphalt and similar surfaces.
Richco Anti Slip Traffic Paint can be applied to existing paint provided all poorly bonded material is removed and glossy surfaces are dulled using abrasive paper.

Application
Stir contents thoroughly to blend in any settlement. Apply Richco Anti Slip Traffic Paint by brush or medium pile roller. One coat is generally sufficient although a second coat may be required on very porous of rough surfaces. Avoid applying too thick. The fine texture may not be immediately apparent when the product is first applied. The texture develops further as the paint cures. Do not apply externally if rain or frost is forecast or if the temperture is below 10°C. The second coat should be applied after approximately 1 hour.

Application Tools
Apply Richco Anti Slip Traffic Paint by brush or medium pile roller.

Cleaning of Application Tools
Clean applicatiors in warm soapy water before the product has started to cure.