Specifications

Area Coverage
Coverage area is approximately 6 - 8m² per coat per 20kg at 1.5mm thick.

Drying Time
Richco Asphalt Restorer resists foot traffic after 2 hours in temperatures above 10°C. Protect from rain and traffic until surface is hard. Avoid vehicular traffic for 2 - 3 days. Poor weather conditions will delay drying time.

Surface Preparation
Thoroughly sweep asphalt/tarmac to remove all dust, dirt and loose material.
Remove any weeds and standing water.
The product will tolerate some damp in the surface. In hot, dry conditions dampen very dry surfaces with water.

Application
Apply only in dry, warm conditions above 10°C. Do not apply in the cold and damp or when rain is forecast. Pour onto the surface and spread in one direction using a notched trowel to obtain and even coverage. In minutes the coating will turn from brown to black. Immediately lightly drag a soft bristle broom dampened with water across the surface to flatten the edges left by the trowel. The resulting fine brush marks will wear away as the surface is used.

Application Tools
Apply Richco Asphalt Restorer using a notched trowel and soft bristle broom.

Over Coating
If a thickness greater than 1.5mm is required, several coats may be applied. Please allow each coat to dry before applying the next (about 2 - 3 hours).